Coolroom Chiller Motor Unit - Side Mount
Chiller Motor | for Desmon Coolrooms
CIBIN LAIKA series is a refrigerating system that can be side mounted (fitted to cross over) a cold room. Its monobloc structure makes it possible to create a ready-to-use system that is simple to install and use.
Options
• Door micro switch
• Water condensation with liquid receiver, pressure control valve, pipe connection ½”
• Tropicalised version
• Condenser fan speed regulator
• Voltage display for machine stop in case of incorrect power supply
• Acoustic siren with flashing light to indicate the alarm state
• Electronic module for connection to Frigotel supervision system
• Evaporator with cataphoretically painting
• Condenser with cataphoretically painting
- Remote units also available | contact our office
Features
• Hermetic compressor
• Anti-vibration compressor brackets
• Air condensation
• Galvanized powder coated sheet steel body
• Evaporator body of aluminium-magnesium alloy
• Evaporator of copper pipes and aluminium fins
• Condenser of copper pipes and aluminium fins
• Automatic restarting low pressure switch
• Automatic restarting high pressure switch
• Compressor timer management to avoid too near start-ups
• Axial fan
• Condenser fans protection
• Thermic compressor protection
• Thermic compressor protection with motor protection*
• Thermostatic expansion valve with external equalization*
• Suction pressure relief valve (only for low temperature models)
• Dehydrator filter
• Suction-side liquid separator
• Defrost hot gas solenoid valve
• Automatic hot gas defrosting
• High and low pressure ¼” pipe plugs
• Condensation outlet siphon
• Condensation outlet resistor (only for low temperature models)
• Cold room ceiling light
• Ambient temperature probe
• Defrosting end temperature probe
• Condensation control temperature probe
• Connecting cable for door resistor with protection fuse 4 A (only for low temperatures models)
• Connecting cable for door micro switch to turn off the system and to turn on the light at door opening
• Transformer
• Digital display with temperature indicator at one decimal
• On/Off switch
• Cold room light switch
• Running state display: cold - defrosting - evaporator fans - alarm status
• Programming keys
• Alarm display
• Manual defrosting key
• Acoustic alarm
• High temperature alarm
• Low temperature alarm
• High temperature alarm dirty condenser
• Low temperature alarm condenser
• Open door alarm
• High pressure alarm
• Low pressure alarm
• Defrosting end alarm because of time-out
• Alarm ambient temperature probe defect
• Alarm defrosting end temperature probe defect
• Alarm condensation control temperature probe defect
• Timer emergency running in case of these events:
- Ambient temperature probe defect
- Defrosting end temperature probe defect
- Condensation control temperature probe defect
- Cold room door open (if there is door micro switch)
• Pre-set connection for Frigotel supervision
*depending on model
Technical Specifications
- Power of Motor: 916W at 43ºC | single phase
- Operating Temp Range: -0ºC to +8ºC
- Ambient rating: 43ºC [for indoor use]
- Side Mount System | Made in Italy | very reliable
Motor Size Dimensions
- Width: 450 mm
- Height: 700 mm
- Depth: 345 mm
IMAGES: 3 View All
Temperature Range: | -0ºC to 8ºC | |
Ambient Temperature: | 43ºC [for indoor use] | |
Ventilation: | Vertical (500mm clearance) | |
Lighting: | (yes) | |
Refrigeration Power: | 916W (@ 2ºC / 43ºC amb) | |
Absorbed Power: | 73W | |
Power Required: | 230v / 1P / 50Hz | |
Dimensions: | W450 x D345 x H700 | |
Volume: | Suitable for 6.2 to 9.5m³ | |
Weight: | 57 Kg | |
GP Outlet: | 10 AMP | |
Energy Consumption: | 6.5A | |
Refrigerant: | R404a | |
Warranty: | 24 / 24 months (parts/labour) | |
Capacity 1: | Produce load 250 kg/m² |